To keep your home in Perth secure, only installing the alarm systems is not enough. You will need to make sure that the systems are working properly. For this reason, you will need to call the professionals for maintenance service at least twice or thrice a year.
Now, let us take a look at how the professionals carry out the maintenance service.
Checking the Sensors
The professionals will check the alarm sensors to check if they are running properly. The reason behind this is that a problem in the sensors can trigger false alarms.
The technicians will clean the sensors and the motion detectors along with them since dirt and dust inside the detector can create a change in heat and lead to a false alarm. So, it is important to get the sensors cleaned frequently as they can get dirty very quickly.
After the end of a service, the professionals will test if the alarm is being triggered correctly to minimize the possibility of a false alarm.
Testing the Communication and Sensor
To keep your alarm systems in Perth working properly, the professionals will check if the communication between the alarm and the central station is working properly. At many times an alarm system does not get triggered or the signal is not being sent upon activation.
Another scenario is the breaking of the radio contact between the sensor and the alarm panel. Here too, the alarm will not get triggered if someone passes through the door. Therefore, maintaining the connectivity between the central station and inter-system of the alarm is important.
The professionals will put the alarm on “test” mode to see if the signals are being sent properly. Since the test mode does not send a phone call to the local authorities, the professionals can trigger a dummy alarm to see if the device is working as it should.
To test the sensors, the professionals will open every door and walk in front of the motion detector to see how the alarm system is performing.
Sometimes an outdated firmware can trigger false alarms or a glitch in them can cause them to work unusually. Since most of the modern alarm systems are software dependent, it is important to call professionals to get the systems checked for software updates.
If the professionals find any errors or if a new firmware is released, they will install it and conduct tests to ensure the proper functioning of your home alarm system in Perth.
If the alarm system is not working at all, the technicians will disassemble the system and diagnose the source of the problem and then they will begin the repairs. But if a component has to be replaced, they will replace it to restore it to its earlier condition.
Stay Protected with the Best Alarm Systems. Call Us Now
If you wish to secure your home with high quality alarm systems in Perth, Advanced Vision Security Pty Ltd is the best company to go for. We provide best in class installations of the alarm systems to ensure complete safety. So, to install an alarm in your home, call us now.